NSN 5306-00-160-1545 · NIIN 001601545 · FSC 5306
NO DASHES 5306001601545
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.334 AND INCHES MAXIMUM 0.381 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.272 AND INCHES MAXIMUM 1.319 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.187 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.938 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 132000 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE H-11,STS BS000,FSC- 98897 |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF ALL TREATMENT RESPONSES STS BS 000,LOCKHEED-GEORGIA CO |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1041A5U015 | 27624 |
| 68484-5A015 | 56878 |
| 68484-5A15 | 56878 |
| STSBG000A05U015 | 56878 |
| 11797A05U015 | 59563 |
| 68484-5A015 | 80539 |
| VS2978A05U015 | 92215 |
| BM3200-5A015 | 97928 |
| STSBG000A05U015 | 98897 |
| VAL23611-5D015 | 06710 |
| VS2978A05U015 | 06950 |
| AIC2263A05U015 | 06725 |
| BM3200-5A015 | 17446 |