NSN 5306-00-177-5324 · NIIN 001775324 · FSC 5306
NO DASHES 5306001775324
In Stock
BOLT,INTERNAL WRENCHING
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.309 AND INCHES MAXIMUM 0.391 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.359 AND INCHES MAXIMUM 0.391 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.176 AND INCHES MAXIMUM 0.183 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.108 AND INCHES MAXIMUM 0.112 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.036 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.094 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 170000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 43.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 410 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 007240429. An older drawing citing one of those numbers resolves here.