NSN 5306-00-201-5625 · NIIN 002015625 · FSC 5306
NO DASHES 5306002015625
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.865 AND INCHES MAXIMUM 1.885 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE STSB9001 CAGEC 5678 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE STSBS001 CAGEC 56878 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.631 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3735 AND INCHES MAXIMUM 0.3745 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 156000 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.210 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| AASK | HEAD STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM AND CHROMATE |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.278 AND INCHES MAXIMUM 2.325 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| STSBG001A06D030 | 27624 |
| 68485-6-30 | 56878 |
| STSBG001A06D030 | 57928 |
| 11701A06D030 | 59563 |
| STSBG001A06D030 | 92215 |
| STSBG001A06D030 | 98897 |
| STSBG001A06D030 | 06725 |
| STSBG001A06D030 | 06710 |
| STSBG001A06D030 | 17446 |