NSN 5306-00-228-3424 · NIIN 002283424 · FSC 5306
NO DASHES 5306002283424
In Stock
BOLT,EXTERNALLY RELIEVED BODY
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| AASK | HEAD STYLE | |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES MINIMUM 3.896 AND INCHES MAXIMUM 3.916 |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | INCHES MINIMUM 4.086 AND INCHES MAXIMUM 4.106 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 100000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 4.802 AND INCHES MAXIMUM 4.822 |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.500 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 1.500 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.134 AND INCHES MAXIMUM 0.154 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.999 AND INCHES MAXIMUM 1.000 |
| AAWD | SECOND DIAMETER FROM HEAD | INCHES MINIMUM 0.646 AND INCHES MAXIMUM 0.666 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758,COND F4 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.966 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 5.052 AND INCHES MAXIMUM 5.072 |
| CMLP | THREAD QUANTITY PER INCH | 16 |