NSN 5306-00-273-7407 · NIIN 002737407 · FSC 5306
NO DASHES 5306002737407
In Stock
BOLT,INTERNAL WRENCHING
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.368 AND INCHES MAXIMUM 0.375 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.064 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.845 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.970 AND INCHES MAXIMUM 1.000 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 150000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.316 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 45.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.550 AND INCHES MAXIMUM 0.562 |
| ASXK | HOLE QUANTITY | 6 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 170000 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 268202PC34 | 53711 |
| MS24677-66 | 80205 |
| FF-S-86 | 81348 |
| MS24677-66 | 96906 |
| 12Z1196-65 | 10001 |
| 650269PC15 | 10001 |
| 293926PC6 | 10001 |
| 734908PC81 | 10001 |
Supersedes
This item replaces cancelled NIINs 002736456 · 008098006. An older drawing citing one of those numbers resolves here.