ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5306-00-280-3333
NSN 5306-00-280-3333  ·  NIIN 002803333  ·  FSC 5306
NO DASHES 5306002803333
In Stock

BOLT,SHEAR

Bolts

Technical characteristics

19 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AASKHEAD STYLE
SFTTSURFACE TREATMENTOVERALL PASSIVATE
MATTMATERIALOVERALL STEEL CORROSION RESISTING
AAJDTHREAD CLASS3A
AASUHEAD HEIGHTINCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.398
CQBCMINIMUM TENSILE STRENGTHPOUNDS PER SQUARE INCH 220000
AATBWIDTH BETWEEN FLATSINCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439
AATCEXTENDED WASHER DIAMETERINCHES MINIMUM 0.639 AND INCHES MAXIMUM 0.649
AATDEXTENDED WASHER THICKNESSINCHES MINIMUM 0.081 AND INCHES MAXIMUM 0.101
AAURGRIP DIAMETERINCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTERFIRST HOLE INCHES MINIMUM 1.251 AND INCHES MAXIMUM 1.291
AHYMNOMINAL THREAD DIAMETERINCHES 0.375
AASATHREAD LENGTHINCHES MINIMUM 0.589 AND INCHES MAXIMUM 0.639
THSDTHREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
ANEEGRIP LENGTHINCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.885
CMLPTHREAD QUANTITY PER INCH24
AAJFTHREAD DIRECTIONRIGHT-HAND
AASBFASTENER LENGTHINCHES MINIMUM 1.474 AND INCHES MAXIMUM 1.504
AAWBSHANK UNTHREADED HOLE DIAMETERFIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111

Cross-references

19 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
ST3M571-6D1427624
74328-6D1456878
S11-1059-6D1457928
MB84-6D1473197
ST3M571-6D1476301
ST3M571-6D1480539
ST3M571-6D1492215
VS3060-6D1492215
BM3326-6D1497928
S371-6D1497928
MB84-6D14L4528
AIC752-6D1406725
VS3060-6D1406950
VAL23033-6D1406710
ST3M571-6D1408524
ST3M571-6D140JV78
BM3326-6D1417446
S371-6D1417446
ST3M571-6D1417446