NSN 5306-00-281-7172 · NIIN 002817172 · FSC 5306
NO DASHES 5306002817172
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.630 AND INCHES MAXIMUM 1.690 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASK | HEAD STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.338 AND INCHES MAXIMUM 0.358 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.521 AND INCHES MAXIMUM 0.531 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.072 AND INCHES MAXIMUM 0.092 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.302 AND INCHES MAXIMUM 1.322 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.838 AND INCHES MAXIMUM 1.888 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.586 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AAJD | THREAD CLASS | 3A |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GS1030-5D21 | 1EM77 |
| ST3M571-5D21 | 27624 |
| 74328-5D21 | 56878 |
| S11-1059-5D21 | 57928 |
| MB84-5D21 | 73197 |
| ST3M571-5D21 | 76301 |
| VS3060-5D21 | 92215 |
| BM3326-5D21 | 97928 |
| S371-5D21 | 97928 |
| VAL23033-5D21 | 06710 |
| AIC752-5D21 | 06725 |