NSN 5306-00-286-0294 · NIIN 002860294 · FSC 5306
NO DASHES 5306002860294
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.319 AND INCHES MAXIMUM 1.366 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.948 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.174 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.371 AND INCHES MAXIMUM 0.438 |
| AASK | HEAD STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.202 AND INCHES MAXIMUM 1.259 |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
20 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1253-4D15 | 27624 |
| S11-1060-4D15 | 57928 |
| 109453-4D15 | 56878 |
| FIT7047-4D15 | 58998 |
| 11825-4D15 | 59563 |
| AIC753-4D15 | 6W912 |
| MB61-4D15 | 73197 |
| ST3M453-4D15 | 76301 |
| 109453-4D15 | 80539 |
| VS3204-4D15 | 92215 |
| BM17019-4D15 | 97928 |
| S353-4D15 | 97928 |
| MB61-4D15 | L4528 |
| AIC753-4D15 | 06725 |
| VAL23029-4D15 | 06710 |
| VS3204-4D15 | 06950 |
| ST3M453-4D15 | 0UCY9 |
| HP5453-4D15 | 0ZC92 |
| S353-4D15 | 17446 |
| BM17019-4D15 | 17446 |