ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5306-00-288-2475
NSN 5306-00-288-2475  ·  NIIN 002882475  ·  FSC 5306
NO DASHES 5306002882475
In Stock

BOLT,SHEAR

Bolts

Technical characteristics

19 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
CQBCMINIMUM TENSILE STRENGTHPOUNDS PER SQUARE INCH 220000
AASBFASTENER LENGTHINCHES MINIMUM 2.709 AND INCHES MAXIMUM 2.739
AAJDTHREAD CLASS3A
AATBWIDTH BETWEEN FLATSINCHES MINIMUM 0.616 AND INCHES MAXIMUM 0.627
AATCEXTENDED WASHER DIAMETERINCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.938
AATDEXTENDED WASHER THICKNESSINCHES MINIMUM 0.123 AND INCHES MAXIMUM 0.143
AAURGRIP DIAMETERINCHES MINIMUM 0.5610 AND INCHES MAXIMUM 0.5615
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTERFIRST HOLE INCHES MINIMUM 2.456 AND INCHES MAXIMUM 2.496
AASUHEAD HEIGHTINCHES MINIMUM 0.547 AND INCHES MAXIMUM 0.567
AHYMNOMINAL THREAD DIAMETERINCHES 0.562
ANEEGRIP LENGTHINCHES MINIMUM 1.865 AND INCHES MAXIMUM 1.885
CMLPTHREAD QUANTITY PER INCH18
AASKHEAD STYLE
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTHINCHES MINIMUM 0.824 AND INCHES MAXIMUM 0.874
AAWBSHANK UNTHREADED HOLE DIAMETERFIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.146
MATTMATERIALOVERALL STEEL CORROSION RESISTING
SFTTSURFACE TREATMENTOVERALL PASSIVATE
THSDTHREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)

Cross-references

18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
GS1030-9D301EM77
ST3M571-9D3027624
74328-9D3056878
S11-1059-9D3057928
ST3M571-9D3058998
MB84-9D3073197
ST3M571-9D3076301
VS3060-9D3092215
BM3326-9D3097928
S371-9D3097928
MB84-9D30L4528
ST3M571-9D30007R1
AIC752-9D3006725
VAL23033-9D3006710
VS3060-9D3006950
ST3M571-9D300CZ92
S371-9D3017446
BM3326-9D3017446