ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5306-00-294-9740
NSN 5306-00-294-9740  ·  NIIN 002949740  ·  FSC 5306
NO DASHES 5306002949740
In Stock

BOLT,SHEAR

Bolts

Technical characteristics

19 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AASUHEAD HEIGHTINCHES MINIMUM 0.608 AND INCHES MAXIMUM 0.628
AAJFTHREAD DIRECTIONRIGHT-HAND
AATDEXTENDED WASHER THICKNESSINCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.160
AAURGRIP DIAMETERINCHES MINIMUM 0.6235 AND INCHES MAXIMUM 0.6240
AAJDTHREAD CLASS3A
AASKHEAD STYLE
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTERFIRST HOLE INCHES MINIMUM 3.528 AND INCHES MAXIMUM 3.548
AATCEXTENDED WASHER DIAMETERINCHES MINIMUM 1.040 AND INCHES MAXIMUM 1.050
AHYMNOMINAL THREAD DIAMETERINCHES 0.625
ANEEGRIP LENGTHINCHES MINIMUM 2.865 AND INCHES MAXIMUM 2.885
AASATHREAD LENGTHINCHES MINIMUM 0.887 AND INCHES MAXIMUM 0.937
AASBFASTENER LENGTHINCHES MINIMUM 3.772 AND INCHES MAXIMUM 3.802
THSDTHREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
CQBCMINIMUM TENSILE STRENGTHPOUNDS PER SQUARE INCH 220000
SFTTSURFACE TREATMENTOVERALL PASSIVATE
CMLPTHREAD QUANTITY PER INCH18
AAWBSHANK UNTHREADED HOLE DIAMETERFIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.146
MATTMATERIALOVERALL STEEL CORROSION RESISTING
AATBWIDTH BETWEEN FLATSINCHES MINIMUM 0.679 AND INCHES MAXIMUM 0.690

Cross-references

20 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
GS1030-10D461EM77
ST3M571-10D4627624
ST3M571-10D4626724
74328-10D4656878
S11-1059-10D4657928
ST3M571-10D4658998
MB84-10D4673197
ST3M571-10D4676301
74328-10D4680539
VS3060-10D4692215
BM3326-10D4697928
S371-10D4697928
MB84-10D46L4528
ST3M571-10D46007R1
VS3060-10D4606950
AIC752-10D4606725
VAL23033-10D4606710
ST3M571-10D460JV78
BM3326-10D4617446
S371-10D4617446