NSN 5306-00-297-2888 · NIIN 002972888 · FSC 5306
NO DASHES 5306002972888
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.434 AND INCHES MAXIMUM 0.436 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.188 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| AAJD | THREAD CLASS | 2A |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.309 AND INCHES MAXIMUM 0.310 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES NOMINAL 0.630 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.075 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-B-613,CO- B COND 1 TO 2 HARD |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| FEAT | SPECIAL FEATURES | UNDERCUT BETWEEN SHOULDER AND THD 0.090 IN. W BY 0.203 IN. DIA,SLOT IN THD END 0.300 IN. LG |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 0.850 |
| MATT | MATERIAL | OVERALL COPPER ALLOY |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.