NSN 5306-00-310-5756 · NIIN 003105756 · FSC 5306
NO DASHES 5306003105756
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 316L |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2483 AND INCHES MAXIMUM 0.2492 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| FEAT | SPECIAL FEATURES | LOCKING ELEMENT ON SHANK |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| AASK | HEAD STYLE | |
| ANEE | GRIP LENGTH | INCHES MINIMUM 7.500 AND INCHES MAXIMUM 7.516 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 95000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 41.0 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 7.918 AND INCHES MAXIMUM 7.938 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 7.818 AND INCHES MAXIMUM 7.848 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-8503 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.282 AND INCHES MAXIMUM 0.333 |
| AAJD | THREAD CLASS | 3A |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.126 AND INCHES MAXIMUM 0.141 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CA4510-4-120 | 29372 |
| ST3M735-4-120 | 76301 |
| MS27576-4-120 | 80205 |
| ST3M735-4-120 | 80539 |
| 106467-4-120 | 80539 |
| 121673-4-120 | 80539 |
| AS194-4-120 | 84256 |
| MS27576-4-120 | 96906 |
Supersedes
This item replaces cancelled NIIN 011037903. An older drawing citing one of those numbers resolves here.