NSN 5306-00-350-6454 · NIIN 003506454 · FSC 5306
NO DASHES 5306003506454
In Stock
BOLT,MACHINE
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.140 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| AAJD | THREAD CLASS | 2A |
| MATT | MATERIAL | OVERALL STEEL OR STEEL COMP 8630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624,8730 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-624 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.510 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 4.625 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 1.500 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 1.000 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.375 |
| THSD | THREAD SERIES DESIGNATOR | UNS |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 45.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 4.500 |
| FEAT | SPECIAL FEATURES | UNDERCUT 0.562 IN.W BY 0.140 IN. DEEP AT 4.063 IN. FROM LARGEST BEARING SURFACE OF HEAD; DRILL 2 HOLES 90 DEG APART,THREAD END |
| AASK | HEAD STYLE |