NSN 5306-00-474-3503 · NIIN 004743503 · FSC 5306
NO DASHES 5306004743503
In Stock
BOLT,EXTERNALLY RELIEVED BODY
Bolts
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6322 |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | INCHES MINIMUM 0.146 AND INCHES MAXIMUM 0.166 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.077 AND INCHES MAXIMUM 0.082 |
| CSFL | ASKEWED HEAD ANGLE | DEGREES NOMINAL 30.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.448 AND INCHES MAXIMUM 0.488 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.125 |
| AAWD | SECOND DIAMETER FROM HEAD | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.200 |
| AAWE | THIRD DIAMETER FROM HEAD | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.302 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.375 AND INCHES MAXIMUM 1.395 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 29.0 AND ROCKWELL C MAXIMUM 34.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.295 AND INCHES MAXIMUM 1.315 |
| AAJD | THREAD CLASS | 3A |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 4 |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | INCHES NOMINAL 0.312 |
| AAWF | FOURTH DIAMETER FROM HEAD | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.200 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES MINIMUM 0.084 AND INCHES MAXIMUM 0.104 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| AAWK | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | INCHES MINIMUM 0.646 AND INCHES MAXIMUM 0.666 |
| AASK | HEAD STYLE | |
| AAWL | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CBBL | FEATURES PROVIDED | CASE-HARDENED |