NSN 5306-00-492-6985 · NIIN 004926985 · FSC 5306
NO DASHES 5306004926985
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 132000 |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE STSBS000 FSC- 98897 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM AND CHROMATE |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.735 AND INCHES MAXIMUM 1.751 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.281 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.741 AND INCHES MAXIMUM 0.752 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.547 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.875 AND INCHES MAXIMUM 1.922 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.106 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.375 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4985 AND INCHES MAXIMUM 0.4995 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| STSBG000A08D022 | 27624 |
| 68484-8-022 | 56878 |
| 11797A08D022 | 59563 |
| 68484-8-022 | 80539 |
| STSBG000A08D022 | 92215 |
| STSBG000A08D022 | 97928 |
| STSBG000A08D022 | 98897 |
| STSBG000A08D022 | 06725 |
| STSBG000A08D022 | 06710 |
| STSBG000A08D022 | 17446 |