NSN 5306-00-503-5721 · NIIN 005035721 · FSC 5306
NO DASHES 5306005035721
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4985 AND INCHES MAXIMUM 0.4995 |
| AAJD | THREAD CLASS | 3A |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.741 AND INCHES MAXIMUM 0.752 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.547 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.547 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.281 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE STSBS001 FSC- 98897 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.000 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 156000 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1042A8U016 | 27624 |
| 68485-8A16 | 50392 |
| 68485-8A16 | 56878 |
| 11701A08U016 | 59563 |
| VS2979A08U016 | 92215 |
| BM3210-8A016 | 97928 |
| STSBG001A08U016 | 98897 |
| AIC2264A08U016 | 06725 |
| VS2979A08U016 | 06950 |
| VAL23602-8D016 | 06710 |
| BM3210-8A016 | 17446 |