NSN 5306-00-514-9108 · NIIN 005149108 · FSC 5306
NO DASHES 5306005149108
In Stock
BOLT,EXTERNALLY RELIEVED BODY
Bolts
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.594 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6317 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.312 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.250 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES NOMINAL 0.390 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | OVERALL STEEL |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.984 |
| AASM | BOTTOM COUNTERSINK DIAMETER | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.250 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.188 |
| FEAT | SPECIAL FEATURES | THD PITCH DIA MUST BE CONCENTRIC,SQUARE AND TRUE TO BODY WITHIN 0.006 AND TO TAPER WITHIN 0.004 FULL INDICATOR READINGS WHEN MTD ON CENTERS OR EQUIVALENT |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 90.0 |