NSN 5306-00-531-8940 · NIIN 005318940 · FSC 5306
NO DASHES 5306005318940
In Stock
BOLT,MACHINE
Bolts
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2416 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.481 AND INCHES MAXIMUM 0.552 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.320 AND INCHES MAXIMUM 0.340 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.070 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.060 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.304 AND INCHES MAXIMUM 0.313 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| MATT | MATERIAL | OVERALL STEEL COMP 601 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6304 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.2213 TO 0.2238 |
| ASXK | HOLE QUANTITY | 3 |
| BQDM | HOLE TYPE | DRILLED |
| FEAT | SPECIAL FEATURES | DUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES & MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY |
| THSD | THREAD SERIES DESIGNATOR | UNF |