NSN 5306-00-534-4514 · NIIN 005344514 · FSC 5306
NO DASHES 5306005344514
In Stock
BOLT,INTERNAL WRENCHING
Bolts
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.620 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 80.0 |
| MATT | MATERIAL | OVERALL STEEL |
| ASXK | HOLE QUANTITY | 2 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 42.0 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ABQZ | INTERNAL DRIVE STYLE | |
| BQDM | HOLE TYPE | DRILLED |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 172000 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.620 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.375 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.250 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.050 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.188 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8393 | 11599 |
Supersedes
This item replaces cancelled NIIN 002726381. An older drawing citing one of those numbers resolves here.