NSN 5306-00-543-5174 · NIIN 005435174 · FSC 5306
NO DASHES 5306005435174
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.400 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.946 AND INCHES MAXIMUM 2.993 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 2.562 |
| MATT | MATERIAL | OVERALL STEEL |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3735 AND INCHES MAXIMUM 0.3745 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.226 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE -AC S13145,-CDONNELL DOUGLAS COR |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 2.821 AND INCHES MAXIMUM 2.878 |
| AASK | HEAD STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 24 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 73992-6D41 | 56878 |
| MB13-6D41 | 73197 |
| ST3M561-6D41 | 76301 |
| BM17028-6-41D | 97928 |
| MB13-6D41 | C4293 |
| MB13-6D41 | R1120 |
| MB13-6D41 | L4528 |
| ST3M561-6D41 | 01UA8 |
| AIC244-6D41 | 06725 |
| A1C244-6D41 | 06725 |
| BM17028-6-41D | 17446 |