NSN 5306-00-551-1784 · NIIN 005511784 · FSC 5306
NO DASHES 5306005511784
In Stock
BOLT,MACHINE
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 601 |
| BQDM | HOLE TYPE | DRILLED |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.062 |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.428 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD ALL TREATMENT RESPONSES A-S 2416 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.2213 TO 0.2238 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| FEAT | SPECIAL FEATURES | CRITICAL FEATURES,TOLERANCES,FIT RESTRICTIONS,MATERIAL PROPERTIES AND MANUFACTURING PROCESS |
| ASXK | HOLE QUANTITY | 6 |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6304 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 007747568 · 008106144. An older drawing citing one of those numbers resolves here.