NSN 5306-00-660-2447 · NIIN 006602447 · FSC 5306
NO DASHES 5306006602447
In Stock
BOLT,INTERNAL WRENCHING
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 40.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-8503 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-6049 |
| AASK | HEAD STYLE | |
| BQDM | HOLE TYPE | DRILLED |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.162 AND INCHES MAXIMUM 1.212 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.860 AND INCHES MAXIMUM 3.890 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.055 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ASXK | HOLE QUANTITY | 4 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.875 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASL | HEAD DIAMETER | INCHES MINIMUM 1.428 AND INCHES MAXIMUM 1.438 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CLASS 2 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.875 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.629 |
| AAJD | THREAD CLASS | 3A |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-B-7838 | 80205 |
| MIL-B-7838 | 81349 |
| MS20014H43 | 96906 |