NSN 5306-00-722-8272 · NIIN 007228272 · FSC 5306
NO DASHES 5306007228272
In Stock
BOLT,EXTERNALLY RELIEVED BODY
Bolts
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.552 AND INCHES MAXIMUM 2.572 |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.2213 TO 0.2238 |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.712 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.320 AND INCHES MAXIMUM 0.340 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.304 AND INCHES MAXIMUM 0.313 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.070 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.246 AND INCHES MAXIMUM 0.247 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 140000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | INCHES MINIMUM 1.340 AND INCHES MAXIMUM 1.360 |
| AAWK | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | INCHES MINIMUM 1.840 AND INCHES MAXIMUM 1.860 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 3 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5616 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAWD | SECOND DIAMETER FROM HEAD | INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.228 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| AAWE | THIRD DIAMETER FROM HEAD | INCHES MINIMUM 0.246 AND INCHES MAXIMUM 0.247 |