NSN 5306-00-782-0766 · NIIN 007820766 · FSC 5306
NO DASHES 5306007820766
In Stock
BOLT,MACHINE
Bolts
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ASXK | HOLE QUANTITY | 4 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.309 AND INCHES MAXIMUM 0.329 |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | |
| BQDM | HOLE TYPE | DRILLED |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.040 AND INCHES MAXIMUM 0.060 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.055 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.364 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.503 AND INCHES MAXIMUM 0.553 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 16000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 51.0 AND ROCKWELL C MAXIMUM 53.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6485 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2416 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.575 AND INCHES MAXIMUM 0.585 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.033 AND INCHES MAXIMUM 1.063 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.