NSN 5306-00-809-2815 · NIIN 008092815 · FSC 5306
NO DASHES 5306008092815
In Stock
BOLT,MACHINE
Bolts
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| SFTT | SURFACE TREATMENT | OVERALL SILVER |
| ASXK | HOLE QUANTITY | 4 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5732 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.595 AND INCHES MAXIMUM 0.678 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.062 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.2797 TO 0.2824 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| BQDM | HOLE TYPE | DRILLED |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| FEAT | SPECIAL FEATURES | MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS,MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY.ACTION ID 45402786 |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 24.0 AND ROCKWELL C MAXIMUM 36.0 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 85000 |