NSN 5306-00-832-9778 · NIIN 008329778 · FSC 5306
NO DASHES 5306008329778
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.808 AND INCHES MAXIMUM 1.838 |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 1.125 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AAJD | THREAD CLASS | 3A |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6220 AND INCHES MAXIMUM 0.6250 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.376 AND INCHES MAXIMUM 1.396 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 1.656 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.346 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.104 AND INCHES MAXIMUM 0.111 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE DS 9.74 TY 2 FSC- 88277 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | INCHES NOMINAL 0.308 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.375 |