NSN 5306-00-833-2678 · NIIN 008332678 · FSC 5306
NO DASHES 5306008332678
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 0.765 AND INCHES MAXIMUM 0.781 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.8750 AND INCHES MAXIMUM 0.8765 |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | INCHES NOMINAL 0.445 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.281 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 1.312 AND INCHES MAXIMUM 1.374 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.969 AND INCHES MAXIMUM 2.031 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.062 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.7054 TO 0.7094 |
| CQFM | HARDNESS RATING | OVERALL BRINELL HULTGREN MINIMUM 196.0 AND BRINELL HULTGREN MAXIMUM 228.0 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| FEAT | SPECIAL FEATURES | 0.125 IN. W BY 10.0 DEG TAPER AT SHOULDER,0.062 IN. BY 45.0 DEG CHAMFER AT TAPER FINISH TO 0.749 IN. DIA,0.062 IN. BY 45.0 DEG CHAMFER AT THREAD END |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR ZINC |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 004048417 · 005620736. An older drawing citing one of those numbers resolves here.