NSN 5306-00-849-8443 · NIIN 008498443 · FSC 5306
NO DASHES 5306008498443
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BQDM | HOLE TYPE | DRILLED |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5616 |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRHC | HOLE CONFIGURATION STYLE | |
| ASXK | HOLE QUANTITY | 4 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.070 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.671 AND INCHES MAXIMUM 0.695 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 0.065 AND INCHES MAXIMUM 0.069 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.345 AND INCHES MAXIMUM 0.355 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |