NSN 5306-00-868-6366 · NIIN 008686366 · FSC 5306
NO DASHES 5306008686366
In Stock
BOLT,TEE HEAD
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.370 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.144 |
| AASL | HEAD DIAMETER | INCHES NOMINAL 1.280 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASK | HEAD STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| AAJD | THREAD CLASS | 3A |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.250 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 150000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 2.220 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 1.120 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3-85912-2 | 81205 |
Supersedes
This item replaces cancelled NIIN 002068847. An older drawing citing one of those numbers resolves here.