NSN 5306-01-019-9669 · NIIN 010199669 · FSC 5306
NO DASHES 5306010199669
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.372 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.877 AND INCHES MAXIMUM 0.924 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.150 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
17 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GS1016-3-9 | 1EM77 |
| PBF1253-3-9 | 27624 |
| LD111-0026-0309 | 43999 |
| S11-1060-3-9 | 57928 |
| 109453-3-9 | 56878 |
| KS3020-3-9 | 59764 |
| FIT7047-3-9 | 58998 |
| 11825-3-9 | 59563 |
| MB61-3-9 | 73197 |
| ST3M453-3-9 | 76301 |
| 109453-3-9 | 80539 |
| MB61-3-9 | L4528 |
| AIC753-3-9 | 06725 |
| VS3204-3-9 | 06950 |
| VAL23029-3-9 | 06710 |
| HP5453-3-9 | 0ZC92 |
| BM17019-3-9 | 17446 |
Supersedes
This item replaces cancelled NIIN 011955826. An older drawing citing one of those numbers resolves here.