NSN 5306-01-027-1998 · NIIN 010271998 · FSC 5306
NO DASHES 5306010271998
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.441 AND INCHES MAXIMUM 0.508 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.889 AND INCHES MAXIMUM 0.936 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.177 AND INCHES MAXIMUM 0.197 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112,-CDONNEL DOUGLAS COR |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
22 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GS1016-5-7 | 1EM77 |
| ST3M453-5-7 | 27624 |
| LD111-0026-0507 | 43999 |
| ST3M453-5-7 | 57928 |
| 109453-5-7 | 56878 |
| ST3M453-5-7 | 56878 |
| ST3M453-5-7 | 59764 |
| 11825-5-7 | 59563 |
| ST3M453-5-7 | 58998 |
| ST3M453-5-7 | 58845 |
| MB61-5-7 | 73197 |
| ST3M453-5-7 | 76301 |
| 109453-5-7 | 80539 |
| US3204-5-7 | 92215 |
| BM17019-5-7 | 97928 |
| MB61-5-7 | L4528 |
| AIC753-5-7 | 06725 |
| VAL23029-5-7 | 06710 |
| ST3M453-5-7 | 0JV78 |
| ST3M453-5-7 | 0UCY9 |
| ST3M453-5-7 | 0ZC92 |
| BM17019-5-7 | 17446 |
Supersedes
This item replaces cancelled NIIN 012268732. An older drawing citing one of those numbers resolves here.