ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5306-01-028-9193
NSN 5306-01-028-9193  ·  NIIN 010289193  ·  FSC 5306
NO DASHES 5306010289193
In Stock

BOLT,SHEAR

Bolts

Technical characteristics

27 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTHINCHES MINIMUM 0.444 AND INCHES MAXIMUM 0.494
AASBFASTENER LENGTHINCHES MINIMUM 1.954 AND INCHES MAXIMUM 1.984
AASKHEAD STYLE
AASUHEAD HEIGHTINCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.171
AATBWIDTH BETWEEN FLATSINCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502
AAURGRIP DIAMETERINCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120
AAWBSHANK UNTHREADED HOLE DIAMETERFIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086
AHYMNOMINAL THREAD DIAMETERINCHES 0.312
ANEEGRIP LENGTHINCHES MINIMUM 1.490 AND INCHES MAXIMUM 1.510
CBBLFEATURES PROVIDEDFINISHED HEAD
CMLPTHREAD QUANTITY PER INCH24
CQBCMINIMUM TENSILE STRENGTHPOUNDS PER SQUARE INCH 160000
CQFMHARDNESS RATINGOVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0
CRTLCRITICALITY CODE JUSTIFICATIONFEAT
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTERFIRST HOLE INCHES MINIMUM 1.763 AND INCHES MAXIMUM 1.813
CSYMSURFACE FINISHBEARING SURFACE OF HEAD MICROINCHES 63.0
CSYMSURFACE FINISHTHREADS MICROINCHES 32.0
CSYMSURFACE FINISHGRIP MICROINCHES 63.0
FEATSPECIAL FEATURESCRITICAL SAFETY ITEM (CSI)
MATTMATERIALOVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONOVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-8503 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-6049
PRPYPROPRIETARY CHARACTERISTICSPACS
SFTTSURFACE TREATMENTOVERALL CADMIUM AND CHROMATE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONOVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416 TY 2,CLASS 2
THSDTHREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)

Cross-references

16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
20-057-5-24D27624
20-057-5-24D56878
20-057-5-24D62384
20-057-5-24D64728
20-057-5-24D80539
5306PL14966899009H
20-057-5-24D 9749997499
20-057-5-24D97928
20-057-5-24D97499
20-057-5-24DA0126
20-057-5-24D06950
20-057-5-24D06725
20-057-5-24D0PTK6
20-057-5-24D0K6Z0
20-057-5-24D0ZC92
20-057-5-24D17446