NSN 5306-01-044-2234 · NIIN 010442234 · FSC 5306
NO DASHES 5306010442234
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.374 AND INCHES MAXIMUM 0.441 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.220 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.260 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR CADMIUM OR CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GB511B6-20 | 26512 |
| GB511B6-20 | 27624 |
| EWSB22D6-A20 | 56878 |
| GB511B6-20 | 73197 |
| EWSB22D6-A20 | 80539 |
| VS3071-6F20 | 92215 |
| GB511B6-20 | 92215 |
| H401-6-20 | 97928 |
| BM17020-6-20A | 97928 |
| GB511B6-20 | L4528 |
| AIC516B6-20 | 06725 |
| VAL22034-6F20 | 06710 |
| VS3071-6F20 | 06950 |
| VAL22034-6G20 | 06710 |
| BM17020-6-20A | 17446 |
Supersedes
This item replaces cancelled NIINs 009036052 · 009170897. An older drawing citing one of those numbers resolves here.