NSN 5306-01-045-2462 · NIIN 010452462 · FSC 5306
NO DASHES 5306010452462
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.374 AND INCHES MAXIMUM 0.441 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 4.025 AND INCHES MAXIMUM 4.056 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.220 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3733 AND INCHES MAXIMUM 0.3742 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.111 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 3.606 AND INCHES MAXIMUM 3.626 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 4.276 AND INCHES MAXIMUM 4.308 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 26512-GB511B |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GB511B6D58 | 27624 |
| GB511B6D58 | 26512 |
| EWSB22D6-58 | 56878 |
| EWSB22D6-58 | 80539 |
| VS3071-6F58D | 92215 |
| GB511B6D58 | 97928 |
| H401-6D58 | 97928 |
| BM17020-6-58 | 97928 |
| AIC516B6D58 | 06725 |
| GB511B6D58 | 06710 |
| VS3071-6F58D | 06950 |
| BM17020-6-58 | 17446 |