NSN 5306-01-045-9525 · NIIN 010459525 · FSC 5306
NO DASHES 5306010459525
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.824 AND INCHES MAXIMUM 0.874 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.334 AND INCHES MAXIMUM 2.364 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.547 AND INCHES MAXIMUM 0.567 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.616 AND INCHES MAXIMUM 0.627 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.938 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.123 AND INCHES MAXIMUM 0.143 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.592 AND INCHES MAXIMUM 0.593 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 1.490 AND INCHES MAXIMUM 1.510 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.146 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.562 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 2.081 AND INCHES MAXIMUM 2.121 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| MATT | MATERIAL | OVERALL STEEL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 74328-9D24Y | 56878 |
| ST3M607-9D24 | 59563 |
| MB87-9D24 | 73197 |
| ST3M607-9D24 | 76301 |
| 74328-9D24Y | 80539 |
| VS3061-9D24 | 92215 |
| BM3326-9D24Y | 97928 |
| MB87-9D24 | L4528 |
| VAL23033-9XD24 | 06710 |
| BM3326-9D24Y | 17446 |