NSN 5306-01-046-1196 · NIIN 010461196 · FSC 5306
NO DASHES 5306010461196
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.526 AND INCHES MAXIMUM 0.576 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.848 AND INCHES MAXIMUM 2.878 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.338 AND INCHES MAXIMUM 0.358 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.521 AND INCHES MAXIMUM 0.531 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.072 AND INCHES MAXIMUM 0.092 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.3427 AND INCHES MAXIMUM 0.3432 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 2.302 AND INCHES MAXIMUM 2.322 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 2.640 AND INCHES MAXIMUM 2.680 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| MATT | MATERIAL | OVERALL STEEL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 74328-5D37Y | 56878 |
| ST3M607-5D37 | 59563 |
| MB87-5D37 | 73197 |
| ST3M607-5D37 | 76301 |
| 74328-5D37Y | 80539 |
| VS3061-5D37 | 92215 |
| BM3326-5D37Y | 97928 |
| MB87-5D37 | L4528 |
| VAL23033-5XD37 | 06710 |
| BM3326-5D37Y | 17446 |