NSN 5306-01-054-3405 · NIIN 010543405 · FSC 5306
NO DASHES 5306010543405
In Stock
BOLT,SHEAR
Bolts
Application: AIRCRAFT, F-16
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.370 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.672 AND INCHES MAXIMUM 0.692 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.164 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.531 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2483 AND INCHES MAXIMUM 0.2492 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.036 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 132000 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, F-16 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 0.521 AND INCHES MAXIMUM 0.541 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE NAS 672 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF7521-4D5 | 27624 |
| C7521-4D5 | 56878 |
| 120978-4D5 | 80539 |
| C7521-4D5 | 81755 |
| VS3133-4D5 | 92215 |
| AIC596-4D5 | 06725 |
| C7521-4D5 | 06710 |
| C7521-4D5 | 17446 |