NSN 5306-01-067-3399 · NIIN 010673399 · FSC 5306
NO DASHES 5306010673399
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.432 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.063 AND INCHES MAXIMUM 2.110 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.220 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.678 AND INCHES MAXIMUM 1.698 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.935 AND INCHES MAXIMUM 2.002 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112,FSC- 76301 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M729-6D27 | 56878 |
| ST3M729-6D27 | 58998 |
| MB145-6D27 | 73197 |
| ST3M729-6D27 | 76301 |
| ST3M729-6D27 | 80539 |
| ST3M729-6D27 | 92215 |
| ST3M729-6D27 | 97928 |
| MB145-6D27 | L4528 |
| ST3M729-6D27 | 06725 |
| ST3M729-6D27 | 06950 |
| ST3M729-6D27 | 06710 |
| ST3M729-6D27 | 0ZC92 |
| ST3M729-6D27 | 17446 |