NSN 5306-01-107-6371 · NIIN 011076371 · FSC 5306
NO DASHES 5306011076371
In Stock
BOLT,EXTERNALLY RELIEVED BODY
Bolts
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.540 AND INCHES MAXIMUM 1.570 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.180 AND INCHES MAXIMUM 2.200 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.137 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.432 AND INCHES MAXIMUM 0.437 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.410 AND INCHES MAXIMUM 0.430 |
| AAWD | SECOND DIAMETER FROM HEAD | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.491 |
| AAWE | THIRD DIAMETER FROM HEAD | INCHES MINIMUM 0.400 AND INCHES MAXIMUM 0.420 |
| AAWF | FOURTH DIAMETER FROM HEAD | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.491 |
| AAWG | FIFTH DIAMETER FROM HEAD | INCHES MINIMUM 0.400 AND INCHES MAXIMUM 0.420 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.063 |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | INCHES MINIMUM 0.930 AND INCHES MAXIMUM 0.960 |
| AAWK | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | INCHES MINIMUM 1.071 AND INCHES MAXIMUM 1.101 |
| AAWL | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER | INCHES MINIMUM 1.600 AND INCHES MAXIMUM 1.630 |
| AAWM | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIFTH DIAMETER | INCHES MINIMUM 1.953 AND INCHES MAXIMUM 1.963 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 5 |
| FEAT | SPECIAL FEATURES | HOLE DRILLED IN CENTER OF SCREW TIP 0.098-0.105 IN. DIA BY 1.093-1.110 IN. DEEP |
| MATT | MATERIAL | OVERALL STEEL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3678 | 75078 |