NSN 5306-01-124-0504 · NIIN 011240504 · FSC 5306
NO DASHES 5306011240504
In Stock
BOLT,EYE
Bolts
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.750 |
| AATK | EYE INSIDE DIAMETER | INCHES MINIMUM 1.120 AND INCHES MAXIMUM 1.250 |
| AATP | SHOULDER THICKNESS | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.250 |
| AATR | SHANK LENGTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.620 |
| AATZ | EYE STOCK DIAMETER | INCHES MINIMUM 0.440 AND INCHES MAXIMUM 0.500 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.880 AND INCHES MAXIMUM 0.940 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.810 AND INCHES MAXIMUM 4.190 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| CMLP | THREAD QUANTITY PER INCH | 13 |
| CRHT | DISTANCE FROM CENTER OF EYE TO SHANK END | INCHES MINIMUM 2.810 AND INCHES MAXIMUM 3.060 |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZW AND FEAT |
| CWXM | EYE OUTSIDE WIDTH | INCHES NOMINAL 2.120 |
| FEAT | SPECIAL FEATURES | CERTIFIED FREE FROM MERCURY CONTAMINATION |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-B-45908 |
| SFTT | SURFACE TREATMENT | OVERALL CHROMIUM |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL--23199 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS;SURFACE TREATMENT;THREAD LENGTH |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS51937-5 | 96906 |