NSN 5306-01-124-5760 · NIIN 011245760 · FSC 5306
NO DASHES 5306011245760
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.295 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.810 |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.875 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.090 |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | INCHES MINIMUM 0.370 AND INCHES MAXIMUM 0.375 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.623 AND INCHES MAXIMUM 0.624 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 1.505 AND INCHES MAXIMUM 1.515 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.562 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AATN |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| FEAT | SPECIAL FEATURES | INTERNALLY RELIEVED 0.375 IN. MIN,0.377 IN. MAX THRU HOLE; 2 KEYWAYS IN THD END 0.125 IN. MIN TO 0.130 IN. MAX W BY 0.385 IN. LG |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-8844,CLASS 3,COND E 2 |
| SFTT | SURFACE TREATMENT | GRIP CHROMATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 74A410725-2001 | 35962 |
| 74A410725-2001 | 36164 |
| 74A410725-2001 | 32168 |
| 74A410725-2001 | 50601 |
| 74A410725-2001 | 6K4C8 |
| 74A410725-2001 | 76301 |
| 74A410725-2001 | 9K006 |
| 74A410725-2001 | 17576 |