NSN 5306-01-132-2174 · NIIN 011322174 · FSC 5306
NO DASHES 5306011322174
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.104 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.979 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.351 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.052 AND INCHES MAXIMUM 1.062 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.7485 AND INCHES MAXIMUM 0.7490 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.151 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| ANEE | GRIP LENGTH | INCHES MAXIMUM 1.875 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 2.319 |
| FEAT | SPECIAL FEATURES | HOLES DRILLED NINETY DEGREES APART,PLUNGER IN THREAD END WITH SELF RETAINING ELEMENT |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS 621 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LB52-12-30 | 73197 |
| LB52T12-30 | 73197 |
| LB46-12-30 | 73197 |
| ST3M833V12T30 | 76301 |
| ST3M833V12-30 | 76301 |
| AS297-12T30 | 84256 |
| 10115881 | A486G |
| LB52T12-30 | L4528 |