NSN 5306-01-135-3538 · NIIN 011353538 · FSC 5306
NO DASHES 5306011353538
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.395 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.126 AND INCHES MAXIMUM 0.141 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2487 AND INCHES MAXIMUM 0.2492 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.516 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 0.891 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | RETAINING ELEMENT IN SHANK |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LB36-4-8 | 73197 |
| ST3M764C4-8 | 76301 |
| AS300-4-8 | 84256 |
| 10130710 | A486G |