NSN 5306-01-136-4485 · NIIN 011364485 · FSC 5306
NO DASHES 5306011364485
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.592 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.250 AND INCHES MAXIMUM 3.270 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.400 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.099 AND INCHES MAXIMUM 1.107 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.7485 AND INCHES MAXIMUM 0.7490 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.678 AND INCHES MAXIMUM 2.698 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | ALL HOLES INCHES MINIMUM 3.125 AND INCHES MAXIMUM 3.155 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PBF1265-12D43 | 27624 |
| 122895-12D43 | 56878 |
| 11823-12D43 | 59563 |
| VS3174-12D43 | 5M902 |
| MB154-12D43 | 73197 |
| ST3M744-12D43 | 76301 |
| 122895-12D43 | 80539 |
| VS3174-12D43 | 92215 |
| S406-12D43 | 97928 |
| AIC687-12D43 | 06725 |
| VCG0001-12D43 | 06710 |