NSN 5306-01-175-1001 · NIIN 011751001 · FSC 5306
NO DASHES 5306011751001
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.434 AND INCHES MAXIMUM 1.464 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.934 AND INCHES MAXIMUM 3.964 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.690 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.801 AND INCHES MAXIMUM 1.814 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 1.2480 AND INCHES MAXIMUM 1.2490 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 1.250 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 2.500 |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LD111-0026-2040 | 27624 |
| LD111-0026-2040 | 43999 |
| LD111-0026-2040 | 56878 |
| LD111-0026-2040 | 57928 |
| LD111-0026-2040 | 80539 |
| LD111-0026-2040 | 06725 |
| LD111-0026-2040 | 06710 |
| LD111-0026-2040 | 17446 |