NSN 5306-01-175-9268 · NIIN 011759268 · FSC 5306
NO DASHES 5306011759268
In Stock
BOLT,MACHINE
Bolts
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.607 AND INCHES MAXIMUM 0.627 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.293 AND INCHES MAXIMUM 0.303 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.3125 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.070 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.075 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASXK | HOLE QUANTITY | 2 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | FAILURE COULD PRODUCE FOD INTO THE FAN BYPASS RESULTING IN A BURN THROUGH IN THE EXHAUST LINER |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE C50TF13 CL-B |
| PRMT | PRECIOUS MATERIAL | SILVER |
| SFTT | SURFACE TREATMENT | OVERALL SILVER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE A-S 2410 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 011807072. An older drawing citing one of those numbers resolves here.