NSN 5306-01-185-7128 · NIIN 011857128 · FSC 5306
NO DASHES 5306011857128
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.966 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.701 AND INCHES MAXIMUM 1.731 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.320 AND INCHES MAXIMUM 0.340 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.514 AND INCHES MAXIMUM 0.521 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.807 AND INCHES MAXIMUM 0.817 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.073 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4360 AND INCHES MAXIMUM 0.4370 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.750 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-8837,TY 2,CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| C9698-07012 | 4GP55 |
| 123593 | 80539 |
| C9698-07012 | 81755 |
| VS3324-07012 | 92215 |
| VS3324-07012 | 06950 |
| AIC4698-07-12 | 06725 |