NSN 5306-01-196-3172 · NIIN 011963172 · FSC 5306
NO DASHES 5306011963172
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.441 AND INCHES MAXIMUM 0.510 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.826 AND INCHES MAXIMUM 0.875 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.187 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.514 AND INCHES MAXIMUM 0.521 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GS1031-5-6 | 1EM77 |
| PBF1266-5-6 | 27624 |
| ST3M747-5-6 | 58998 |
| MB155-5-6 | 73197 |
| ST3M747-5-6 | 76301 |
| 122896-5-6 | 80539 |
| VS3191-5-6 | 92215 |
| S397-5-6 | 97928 |
| 10116139 | A486G |
| MB155-5-6 | L4528 |
| VCG0002-5-6 | 06710 |
| VS3191-5-6 | 06950 |
| AIC688-5-6 | 06725 |
| ST3M747-5-6 | 0ZC92 |
| S397-5-6 | 17446 |
Supersedes
This item replaces cancelled NIIN 003219295. An older drawing citing one of those numbers resolves here.