NSN 5306-01-200-1413 · NIIN 012001413 · FSC 5306
NO DASHES 5306012001413
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.603 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.501 AND INCHES MAXIMUM 2.531 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.203 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.554 AND INCHES MAXIMUM 0.564 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3735 AND INCHES MAXIMUM 0.3745 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.928 AND INCHES MAXIMUM 1.948 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 2.294 AND INCHES MAXIMUM 2.344 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR ASSN STD 2ND MATERIAL RESPONSE A-S6322 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS6606 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 20-057-6-31D | 27624 |
| 20-057-6-31D | 56878 |
| 20-057-6-31D | 64728 |
| 20-057-6-31D | 62384 |
| NAS6606D31 | 80205 |
| 20-057-6-31D | 80539 |
| 20-057-6-31D | 97928 |
| 20-057-6-31D | 97499 |
| NAS6606D31 | A0126 |
| 20-057-6-31D | 06950 |
| 20-057-6-31D | 06725 |
| 20-057-6-31D | 0K6Z0 |
| 20-057-6-31D | 0PTK6 |
| 20-057-6-31D | 0ZC92 |
Supersedes
This item replaces cancelled NIIN 010490634. An older drawing citing one of those numbers resolves here.