BOLT,SHEAR

Name: BOLT,SHEAR
Brand: Atlas Air Supply
SKU: 5306012001428
Availability: LimitedAvailability

Bolts

Technical characteristics

22 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES MINIMUM 0.400 AND INCHES MAXIMUM 0.450
AASB	FASTENER LENGTH	INCHES MINIMUM 1.598 AND INCHES MAXIMUM 1.628
AASK	HEAD STYLE
AASU	HEAD HEIGHT	INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.140
AATB	WIDTH BETWEEN FLATS	INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495
AAWB	SHANK UNTHREADED HOLE DIAMETER	FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.250
ANEE	GRIP LENGTH	INCHES MINIMUM 1.178 AND INCHES MAXIMUM 1.198
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 160000
CQFM	HARDNESS RATING	OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	FIRST HOLE INCHES MINIMUM 0.410 AND INCHES MAXIMUM 0.460
CSYM	SURFACE FINISH	GRIP MICROINCHES 63.0
CSYM	SURFACE FINISH	BEARING SURFACE OF HEAD MICROINCHES 63.0
CSYM	SURFACE FINISH	THREADS MICROINCHES 32.0
MATT	MATERIAL	OVERALL STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150
SFTT	SURFACE TREATMENT	OVERALL CADMIUM AND CHROMATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2 CLASS 2
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.